GlobeNewswire

Benchmark Discovers New Gold and Silver Zone

Del

EDMONTON, Alberta, Oct. 09, 2018 (GLOBE NEWSWIRE) -- Benchmark Metals Inc. (the “Company” or “Benchmark”) (TSX-V: BNCH) (OTCQB: CYRTF) (GER: A2JM2X) (FKT: A7CA) – is pleased to announce the discovery of a new mineralized zone at the Lawyers Gold & Silver Project, located in the Golden Triangle region of British Columbia, Canada.

CEO John Williamson commented, “Benchmark geologists continue to discover exciting new mineralization at the project.  The newest discovery lies 300 meters east along strike of the existing Phoenix Zone where 220g/t gold and +10,000g/t silver rock samples were collected at surface.  There is potential that the new and existing zones are connected along the 2.5km mineralized corridor and they represent a large hydrothermal system.  We believe the entire Lawyers package has tremendous potential for large new discoveries and for expansion of existing zones that were never fully mined in the 3 short years of mining operations during the late 1980’s.”

New Zone – Phoenix East
The Phoenix East Zone extends 300 meters to the southeast of the Phoenix Zone and lies on the same geological trend that potentially connects Cliff Creek, Dukes Ridge, and Phoenix to Phoenix East. Much of the intervening area between these zones has not been drill tested.  In addition, all the known zones have not been adequately tested at depth and require drill testing to define the full depth extent, width and strike length of these zones.  The Phoenix East occurrence has an approximate area of 300 meters by 200 meters.  Selected rock grab sample results as follows: 

  • 3.61 g/t Au and 32 g/t Ag;
  • 3.4 g/t Au and 131 g/t Ag;
  • 3.3 g/t Au and 138 g/t Ag;
  • 3.13 g/t Au and 96.5 g/t Ag; and
  • 2.67 g/t Au and 127 g/t Ag.

Phoenix Zone
Four (4) drill holes were have been completed at the Phoenix occurrence, but due to encouraging visual indications and XRF results, three (3) additional diamond core holes were completed. Sulphides and alteration were noted in each hole.  Drilling at Phoenix was designed to test and trace high-grade surface showings previously reported on September 13, 2018.  Drilling at Phoenix totaled 729 meters, with each drill hole approximately 100 meters in length.

Figure 1 illustrates the location of selected high-grade rock results and of the new Phoenix East discovery.  The map can be located online at Benchmark Metals.

A photo accompanying this announcement is available at http://www.globenewswire.com/NewsRoom/AttachmentNg/bc91b637-2819-403c-9e25-259209d2c0d4

Lawyers Gold and Silver Project
The Lawyers Property and formerly producing Cheni Gold and Silver Mine is located 45 km northwest of the Kemess Gold and Copper Mine. The Property contains an existing Mineral Resource hosts a minimum of 16 existing gold and silver occurrences that were never fully mined, developed or explored. Work during the 2018 exploration program has focused on mineralized zones with exposure at surface.  Each zone remains open at strike, width and depth, extending across hundreds of meters.  The 99km2 prospective land package presents a unique opportunity for Benchmark to carry out exploration on a ‘camp’ scale. There remains excellent potential for the discovery of additional low and high-sulphidation epithermal precious metal deposits like those that have been discovered and explored to date in the Golden Triangle region.  In addition, there exists the possibility for the discovery of near-surface or buried ‘bulk tonnage’ deposits which may offer the advantage of economies of scale should future mine development occur.

Quality Assurance and Control
Results from samples was analyzed at ALS Global Laboratories (Geochemistry Division) in Vancouver, Canada (an ISO 9001:2008 accredited facility). The sampling program was undertaken
by Company personnel under the direction of Rob L’Heureux, P.Geol. A secure chain of custody is maintained in transporting and storing of all samples. Gold was assayed using a fire assay with atomic emission spectrometry and gravimetric finish when required (+10g/t Au). Analysis by four acid digestion with 48 element ICP-MS analysis was conducted on all samples with silver and base metal overlimits re-analyzed by atomic absorption or emission spectrometry. Rock chip samples from outcrop/bedrock are selective by nature and they may not be representative of the mineralization hosted on the project.

The technical content of this news release has been reviewed and approved by Michael Dufresne, M.S.c, P.Geol., P.Geo., a qualified person as defined by National Instrument 43-101.

About Benchmark Metals Inc.
Benchmark is a Canadian mineral exploration company with its common shares listed for trading on the TSX Venture Exchange in Canada, the OTCQB Venture Market in the United States and the German Stock Exchanges in Europe.  Benchmark is managed by proven resource sector professionals, who have a track record of advancing exploration projects from grassroots scenarios through to production.

ON BEHALF OF THE BOARD OF DIRECTORS

s/ “John Williamson”
John Williamson, Chief Executive Officer

For further information, please contact:
Jim Greig, President
jimg@BNCHmetals.com
Tel: (780) 437-6624

This news release may contain certain “forward looking statements”. Forward-looking statements involve known and unknown risks, uncertainties, assumptions and other factors that may cause the actual results, performance or achievements of the Company to be materially different from any future results, performance or achievements expressed or implied by the forward-looking statements. Any forward-looking statement speaks only as of the date of this news release and, except as may be required by applicable securities laws, the Company disclaims any intent or obligation to update any forward-looking statement, whether as a result of new information, future events or results or otherwise. Neither TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

 

Om GlobeNewswire

GlobeNewswire
GlobeNewswire
One Liberty Plaza - 165 Broadway
NY 10006 New York

https://globenewswire.com

GlobeNewswire is one of the world's largest newswire distribution networks, specializing in the delivery of corporate press releases financial disclosures and multimedia content to the media, investment community, individual investors and the general public.

Følg saker fra GlobeNewswire

Registrer deg med din epostadresse under for å få de nyeste sakene fra GlobeNewswire på epost fortløpende. Du kan melde deg av når som helst.

Siste saker fra GlobeNewswire

VBI Vaccines to Host Conference Call Tomorrow to Review PROTECT Phase 3 Clinical Data for Sci-B-Vac®16.6.2019 18:00:00 CESTPressemelding

CAMBRIDGE, Mass., June 16, 2019 (GLOBE NEWSWIRE) -- VBI Vaccines Inc. (Nasdaq: VBIV) ("VBI"), a commercial-stage biopharmaceutical company developing next-generation infectious disease and immuno-oncology vaccines, will host a conference call and webcast tomorrow morning, June 17, 2019, at 8:00 AM ET. Management looks forward to reviewing top-line data from PROTECT, one of two pivotal Phase 3 studies for Sci-B-Vac®, the company’s trivalent hepatitis B vaccine. Conference Call and Webcast Details The live webcast and slide presentation can be accessed via the Events/Presentations page in the investors section of the company’s website, https://www.vbivaccines.com/investors/events-presentations/, or by clicking this link: https://edge.media-server.com/m6/p/7ryhzgu2. A replay of the webcast will be archived on the company’s website for 90 days following the live conference call. To listen to the live conference call, please dial: - Toll-free U.S. & Canada Dial-In: (866) 602-1050 - Internat

Apellis Pharmaceuticals Presents Data from Ongoing APL-2 Phase 2 Study in Patients with Cold Agglutinin Disease and Warm Antibody Autoimmune Hemolytic Anemia at 24th European Hematology Association (EHA) Congress15.6.2019 16:00:00 CESTPressemelding

CRESTWOOD, Ky. and WALTHAM Mass., June 15, 2019 (GLOBE NEWSWIRE) -- Apellis Pharmaceuticals Inc. (Nasdaq:APLS), a clinical-stage biopharmaceutical company focused on the development of novel therapeutic compounds to treat disease through the inhibition of the complement system, today announced updated data from its Phase 2 PLAUDIT study of APL-2 in patients with autoimmune hemolytic anemia (AIHA), including cold agglutinin disease (CAD) and warm antibody autoimmune hemolytic anemia (wAIHA). Data from the PLAUDIT trial will be presented in an oral presentation today at the 24th Annual Congress of the European Hematology Association (EHA), held in Amsterdam, the Netherlands. In the ongoing PLAUDIT study, 13 patients with CAD have been enrolled to receive subcutaneous APL-2 treatment, of which 10 patients have been on APL-2 for at least 168 days. The trial has also enrolled 11 patients with wAIHA, 8 of which were Direct Antiglobulin Test (DAT) C3+ (C3+ wAIHA); 5 of the C3+ wAIHA patients

Carpenter Technology and BMT Aerospace Combine Expertise in Redesign and Production of Additively Manufactured Aerospace Component14.6.2019 15:17:00 CESTPressemelding

LE BOURGET, France, June 14, 2019 (GLOBE NEWSWIRE) -- Carpenter Technology Corporation (NYSE:CRS) and Belgium-based BMT Aerospace today announced their cooperation in the development of an additively manufactured (AM) aerospace pinion, using Carpenter Technology’s Custom 465® Stainless. BMT Aerospace and its subsidiary BMT Additive initiated the project by partnering with Carpenter Technology to produce a redesigned pinion. The redesign project was initiated to enable the benefits of additive manufacturing using high quality, printable material that would attain the high-performance expectations for the application. “BMT Aerospace strongly believes in the disruptive potential of additive manufacturing and its possibilities in aerospace,” explained Ewald Goossens, Business Unit Manager of BMT Additive. “As a small player in the market, we strongly believe in cooperation opportunities like these, where each partner can rely and build on a project, starting from its own expertise. Our spe

Immunophotonics and Clinical Laserthermia Systems Announce Immuno-Oncology Research Collaboration and Clinical Trials for Cancer Patients with Solid Tumors14.6.2019 13:00:00 CESTPressemelding

Collaboration will Combine Immunophotonics’ Proprietary Drug, IP-001, and CLS’s TRANBERG Laser Thermal Therapy System and imILT Method ST. LOUIS and LUND, Sweden, June 14, 2019 (GLOBE NEWSWIRE) -- Immunophotonics, Inc. and Clinical Laserthermia Systems, AB (STO:CLS B) (CLS) today announced they have entered into a research collaboration agreement to support a Phase 1b/2a clinical trial for cancer patients with certain solid tumor indications. The research will utilize each company’s respective products and methodologies during treatments and is intended to support early phase clinical trials facilitated by a leading clinical organization. Eligible patients with solid tumors will be treated using the locally administered CLS Immunostimulating Interstitial Laser Thermotherapy (imILT) method, followed immediately by an intratumoral injection of Immunophotonics’ lead asset, IP-001. Under the agreement, the CLS TRANBERG Laser and single-use products will be used in eligible patients enrolle

iCAD Introduces ProFound AI™ for 2D Mammography in Europe13.6.2019 14:00:00 CESTPressemelding

Company to showcase its newest artificial intelligence software solution, ProFound AI for 2D Mammography, in addition to ProFound AI for Digital Breast Tomosynthesis at the SIFEM Medical Conference in France NASHUA, N.H. and LILLE, France, June 13, 2019 (GLOBE NEWSWIRE) -- iCAD, Inc. (NASDAQ: ICAD), a global medical technology leader providing innovative cancer detection and therapy solutions, today announced the launch of ProFound AI™ for 2D Mammography in Europe. This software is the latest addition to iCAD’s deep-learning, artificial intelligence platform and follows the launch of ProFound AI™ for Digital Breast Tomosynthesis (DBT), which was CE Marked in March 2018 and FDA cleared in December 2018. ProFound AI for 2D Mammography and ProFound AI for DBT will both be featured in the iCAD exhibition booth (#24) at the Société Française d'Imagerie de la FEMme (SIFEM) medical conference from June 13-15, 2019 at the Grand Palais in Lille, France. “iCAD is at the forefront of the fight ag

Telix Pharmaceuticals and Eczacıbaşı-Monrol Sign Manufacturing and Distribution Agreement13.6.2019 13:54:00 CESTPressemelding

MELBOURNE, Australia and ISTANBUL, Turkey, June 13, 2019 (GLOBE NEWSWIRE) -- Telix Pharmaceuticals Limited (ASX.TLX) (“Telix”, the “Company”), a clinical-stage biopharmaceutical company focused on the development of diagnostic and therapeutic products based on targeted radiopharmaceuticals or “molecularly-targeted radiation” (MTR) has today announced that it has concluded a master services and distribution agreement with Eczacıbaşı-Monrol. Under the terms of the agreement, Telix has appointed Eczacıbaşı-Monrol as a radiopharmaceutical production partner and distributor in Turkey/Middle East/North Africa. Eczacıbaşı-Monrol is commercially active in more than 40 countries, including important growth territories that complement Telix’s current commercial strategy for the US and Europe. The parties will initially focus on the production and distribution of TLX250-CDx (89Zr-girentuximab) for imaging of renal cell carcinoma with Positron Emission Tomography (PET), including to support the ad