Business Wire

ATP Prevents DDR3 Supply Shortage with New Own-Built DDR3 8 Gbit Components and Modules

Del

ATP Electronics, the leading manufacturer of “Industrial Only” memory and storage solutions, has announced its commitment to provide its own high-density DDR3 8 Gbit components to ensure the steady supply of DDR3 memory, especially for customers in the networking and embedded industries that are yet unable to upgrade to latest-generation platforms immediately.

This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20190312005039/en/

(Graphic: Business Wire)

(Graphic: Business Wire)

As the DRAM market migrates to DDR4 memory, several key manufacturers have already announced end-of-life (EOL) production of DDR3 modules based on high-density DDR3 8 Gbit components, including EOL notice of the components. “ATP is committed to preventing a supply shortage of DDR3 memory that could adversely affect the business operations of our valued customers,” said Marco Mezger, ATP Vice President of Global Marketing. “To continue supporting their requirements for specific DDR3 memory such as VLP RDIMMs or high-density SO-DIMMs now and in the foreseeable future, ATP has decided to provide its own DDR3 8 Gbit components for these modules.”

ATP-Built, Characterized and Tested from IC to Module

ATP’s own-built DDR3 modules consist of meticulously characterized and tested high-quality integrated circuits (ICs). The components are manufactured according to ATP’s exacting standards using 2x nm manufacturing process technology and are tested via an extensive component test program to improve the overall memory module performance.

ATP DDR3 8 Gbit components are free from row hammer effects, thus preventing any disastrous random bit flips caused by the electrical charge of cells leaking to adjacent cells and successively writing data to them. At module level, ATP implements 100% test during burn-in (TDBI) into the production flow to guarantee the high-quality module.

Available DDR3 Configurations

ATP DDR3 components are available in monolithic 8 Gb one-chip select (1CS) or as DDP two-chip select (2CS) for a variety of memory modules based on this technology. DIMMs, SO-DIMMs and Mini-DIMMs in 1CS package are available in 16 GB capacity and 1600 MT/s transfer speed. ATP offers 2CS DIMMs in 16 to 32 GB capacity and 1333 or 1600 MT/s, while 2CS Mini-DIMMs are at 8 GB capacity and 1600 MT/s. ECC and non-ECC options are available on various form factors.

Long-Term Support for Other Legacy DRAM Modules

ATP is fully committed to supporting the legacy memory requirements of customers that are yet unable to upgrade to newer-generation platforms.

In September 2018, ATP signed a partnership agreement with Micron Technology, Inc. to make sure that Micron DDR2 SO-DIMMs, UDIMMs and RDIMMs will continue to be available after Micron announced end-of-life (EOL) notices for these modules. According to the agreement, ATP will manufacture DDR2 DRAM modules for customers that continue to use platforms supporting these memory types.

ATP is also authorized to manufacture SDR/DDR DRAM modules for Micron customers unable to migrate, as well as selected legacy DRAM modules specifically for customers using AMD Embedded/Geode platforms.

With ATP providing 8 Gbit components for DDR3 memory modules, the company reaffirms its commitment to continue supporting legacy memory requirements to maximize customers’ return on infrastructure investments.

For additional information and inquiries about the new ATP DDR3 8 Gbit component-based memory modules, please visit the ATP Website: http://bit.ly/2H5qJJF

About ATP

ATP Electronics is the leading provider of “Industrial Only “high-performance, high-quality and high-endurance NAND flash products and DRAM modules. With over 25 years of manufacturing expertise, ATP ensures that all its products are designed and built to accomplish mission-critical tasks in industrial/automation, telecom, medical, automotive, and enterprise computing applications where high levels of technical proficiency, manufacturing quality, and wide operating temperature ranges are required. ATP is a certified Eco/Green partner of tier one OEMs and all ATP products are fully RoHS and China RoHS compliant. A true manufacturer, ATP manages every stage of the manufacturing process to ensure quality and product longevity, offering in-house design, testing, and tuning from component to product level. ATP supply chain support includes controlled/fixed BOMs and long-term product life cycles. For more information on ATP Electronics, please visit www.atpinc.com or contact us at Info@atpinc.com.

Contact information

Kelly Lin (Kellylin@tw.atpinc.com)

Om Business Wire

Business Wire
Business Wire
24 Martin Lane
EC4R 0DR London

+44 20 7626 1982http://www.businesswire.co.uk

(c) 2018 Business Wire, Inc., All rights reserved.

Business Wire, a Berkshire Hathaway company, is the global leader in multiplatform press release distribution.

Følg saker fra Business Wire

Registrer deg med din epostadresse under for å få de nyeste sakene fra Business Wire på epost fortløpende. Du kan melde deg av når som helst.

Siste saker fra Business Wire

SCG Chemicals Company chooses gPROMS modelling for digital design and operations22.3.2019 15:55:00 CETPressemelding

Process Systems Enterprise (PSE), the Advanced Process Modelling company, today announced that it has signed a long-term agreement with SCG, one of the largest integrated petrochemical companies in South East Asia, to standardise on PSE’s gPROMS® modelling technology for digital design and operations. SCG applies advanced process models within digital design initiatives to explore the process decision space rapidly and effectively, in order to reduce uncertainty and make better, faster and safer design and operating decisions. This help them to accelerate innovation and optimise the design and operation of their process plants. Dr Suracha Udomsak, SCG’s Emerging Business Director and R&D Director, says, “at SCG Chemicals, advanced process modelling (APM) is a key element in our Digital Manufacturing platform. APM accelerates innovation by making the development workflow ‘faster, cheaper & safer’, which are key considerations for us. It is a core technology building block that enables u

Logicor Announces Results for Year Ended 31 December 201822.3.2019 14:29:00 CETPressemelding

Logicor announces strong financial performance for the year ended 31 December Net Operating Income (NOI): €639 million, which represents year on year growth of 2.5%, reflecting our strategic focus on increasing occupancy and capturing market rental growth. Over 60% of NOI is generated in the key markets of the UK (26%), Northern Europe1 (21%) and France (15%). Gross Asset Value: €12.5 billion, a 3.3% increase in valuation, which reflects the strong performance of our portfolio, in particular in Northern Europe. EPRA Occupancy: 94.4%, with physical occupancy up 70 bps over the year, underpinned by strong growth in each of our three largest regions of the UK (+120 bps), Northern Europe (+110 bps) and France (+220 bps). LTV: 51%, down from 52% at year end 2017 following increases in property values. At year end, our debt to EBITDA ratio was 11.3x. Capital Structure In 2018 Logicor (rated BBB (Stable) by S&P) established a Euro Medium Term Note (‘EMTN’) programme and raised €1.8 billion of

Delticom AG/Mytyres.co.uk: Buying Great Value Tyres Online Doesn’t Mean Missing out on Professional Fitting22.3.2019 14:15:00 CETPressemelding

Spring is just around the corner, and it’s time for drivers to start thinking about changing to summer tyres. However, a tyre check may show that your current summer tyres are getting old, worn out, or have visible damage, such as cracks or bumps. If this is the case, then it's time for a new set of tyres. The legal minimum tread depth is 1.6 mm, however experts recommend significantly more – summer tyres should be replaced even if the tread depth is 3 mm. Regardless of mileage, you should change your tyres at least every eight to ten years. This is because the rubber starts to harden, the tyres lose grip on the road, and driving performance is affected. Of course, a set of four new tyres is a significant investment – authorised workshops can often charge between 250 and 350 pounds. If you want to save money, consider the alternatives: the result is an increasing number of customers turning to online shops such as Mytyres.co.uk to buy new tyres. The market share of tyres sold online ha

Trueman Man Clinic Achieves 10000 Surgery Milestone with Its SWITCH Operation22.3.2019 13:00:00 CETPressemelding

Trueman Man Clinic Network announced that the 10,000th surgery utilizing its SWITCH Premature Ejaculation Surgery (Nerve Conservation), has been successfully completed. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20190322005013/en/ Trueman Man Clinic Network has been successfully completed the 10,000th surgery utilizing its SWITCH Premature Ejaculation Surgery (Nerve Conservation). The SWITCH Premature Ejaculation Surgery (SWITCH operation) developed in 2010 by Dr. Yang, the chief director of the Trueman Man Clinic Network, can reduce the side effects of penile neurectomy and maintain the stable reduction of the glans sensation. The Trueman Man Clinic Network is the leading hospitals for male enhancement surgeries in Korea consists of 11 clinics, with 16 doctors working. As of 2019, more than 43,000 man clinic surgeries have been performed. (Photo: Business Wire) The Trueman Man Clinic Network is the leading hospitals for m

Janssen Seeks Expanded Use of DARZALEX®▼ (daratumumab) Combination Therapy for Patients with Newly Diagnosed Multiple Myeloma Who Are Transplant Ineligible22.3.2019 11:22:00 CETPressemelding

The Janssen Pharmaceutical Companies of Johnson & Johnson today announced the submission of a Type II variation application to the European Medicines Agency (EMA) for DARZALEX®▼ (daratumumab) in combination with lenalidomide and dexamethasone (Rd) for the treatment of patients newly diagnosed with multiple myeloma who are ineligible for autologous stem cell transplant (ASCT). “Today’s submission brings us one step closer to our goal of improving treatment outcomes for people newly diagnosed with multiple myeloma,” said José Antonio Burón Vidal, VP Medical Affairs, Europe, Middle East and Africa (EMEA), Janssen-Cilag Limited. “We are incredibly grateful to the patients and investigators who participated in the MAIA clinical trial programme and look forward to working closely with the regulatory authorities to secure approval of this new combination.” The submission is supported by data from the Phase 3 MAIA (MMY3008) study, which were presented at the 60th Annual Meeting of the American

Bartek Ingredients Expands Leadership Team21.3.2019 22:35:00 CETPressemelding

Bartek Ingredients Inc. recently completed a 4,000 ton/year capacity expansion for its malic and food-grade fumaric acid production facility, and today it announces the expansion of its leadership team, with the hiring of Jeff Billig as Vice President of Marketing & Business Development and Heinrich G. Schaefer as International Sales Director. This press release features multimedia. View the full release here: https://www.businesswire.com/news/home/20190321005785/en/ The global leader in malic and fumaric acid ingredients expands its leadership team. (Photo: Business Wire) Bartek’s investment in both its team and facilities reinforces its position as the leader in malic and fumaric acid globally and aligns with its mission to facilitate growth and increase global reach to better serve existing customers and markets while opening up new ones. Bartek’s addition of Billig and Schaefer lays the foundation for additional resource investment in the near future while rapidly increasing its sa